An eye shape guide built around visible measurements
An eye shape label can mean several different things: the outline of the opening, the direction of the corners, or the appearance of an upper-lid fold. Combining those features can make a result difficult to understand. This free eye shape tool separates what it measures. It describes the visible opening through a width-to-height ratio, reports corner orientation when the photograph supports it, and places eye spacing in its own reading.
Start with a clear photograph taken straight toward your face, or use the camera to capture one. The eye shape result includes the lines behind the measurements so you can check how the opening was identified. You can explore the individual readings and share a card with your portrait included or hidden. The descriptions are a vocabulary for your photograph, not a ranking of eye shapes or a claim that one category is preferable.
Eye width divided by opening height describes the visible aperture. The descriptive bands are authored: below 2.6 rounder, 2.6–3.3 almond-like, above 3.3 elongated. They are not population norms. Lid folds, hooding and monolids are not inferred.
Eye shape starts with the visible opening
The eye opening ratio divides the distance between the inner and outer corners by an estimate of the vertical opening height. A larger ratio describes an opening that is longer relative to its height; a smaller ratio describes an opening with more height relative to its width. The calculation is performed on each side before the tool summarizes the result. Check the horizontal and vertical lines, especially if one eye is partly closed.
Our eye shape descriptions use authored bands: below 2.6 is called rounder, from 2.6 through 3.3 is called almond-like, and above 3.3 is called elongated. These are categories chosen for this interface, not population norms or biological boundaries. An eye opening close to a boundary can receive a different description after a small change in expression or detection. The underlying ratio is more informative than treating the label as a permanent identity.
Separate eye shape from corner direction
An elongated eye shape can have an upward, level or downward corner line. The same is true of a rounder opening. The tool therefore measures corner orientation separately as canthal tilt: the angle from the inner corner toward the outer corner, relative to a horizontal fitted to the face. A positive value means the outer corner is higher in that construction. The orientation does not determine the opening category.
Eye spacing is another independent relationship. Here it means the gap between the inner corners divided by average eye-opening width. It does not directly measure the distance between pupil centers, and it is not the value used for lens fitting. Reading eye shape, orientation and spacing separately helps you avoid substituting one number for another. Select each result row to see exactly which points and spans belong to that measurement.
Which eye shape details are outside this tool?
This eye shape detector does not identify hooding, monolids, double eyelids or the anatomy of a lid crease. Those descriptions concern features different from the visible aperture ratio. It also does not infer eye color or depth from the opening. A photograph can show details beyond what a model measures, but the interface should not turn that additional visual information into unsupported labels. The free result stays with its stated geometric features.
The distinction matters when comparing eye shape charts online. One chart may group openings by length and height, another may focus on folds, and another may combine several traits. Their categories need not be interchangeable. Use our ratio and corner lines as specific observations, and read the method whenever another chart gives you a different label. Two descriptions can address different aspects of the same eye without either being a complete account.
Photograph your natural eye opening
Keep the camera at eye level and your face square to the lens. Let your eyes open naturally, relax your brows, and use an expression you can repeat. Squinting, smiling strongly or opening the eyes deliberately wide changes the eye opening that the photograph records. Move hair away from both corners and avoid glare across the iris or lids. A sharp original image gives you more detail for checking the drawn points.
For eye shape analysis, choose one clear frame rather than a collage, filtered screenshot or heavily compressed crop. Keep both eyes in the image, with enough surrounding face for the pose reference. If the result looks unlike the opening you see, inspect the vertical span first: a missed lid edge can change the ratio. Retaking the eye shape photograph with even light is often a better next step than debating a label from an unclear frame.
Use eye shape as a starting point for styling
An eye shape result can support a conversation about the visual effect you want. Emphasis near the center of the lash line can draw attention to height, while emphasis toward the outer corner can draw attention to length. Those are optional styling directions rather than instructions to correct an opening. Compare a subtle version with your usual look, and judge the effect at a normal viewing distance instead of relying only on a tight crop.
Brow framing can change how you read the eye area, so the eyebrow-mapping tool is a useful companion. Keep its guide rays separate from the eye shape calculation: one describes possible framing positions and the other describes an opening in the photograph. If you compare styled and unstyled images, use similar light and expression. A change in the apparent eye opening can reflect the presentation of the image rather than a lasting physical change.
Share an eye shape result without losing the method
Before exporting your eye shape card, select the feature you want to show. The card's highlighted value follows that selection, and its image uses the matching measurement lines. Hiding your face removes the portrait while keeping the geometry and readings. The recipient can then see which opening or corner construction you are discussing. Check the preview because a descriptive eye shape label alone contains less information than the lines and ratio behind it.
Your photograph is processed locally for this free eye shape analysis. The QR code on the card opens the public tool and contains no photo or personal measurement payload. Sharing the downloaded image is a separate choice under your control. Related features can explain corner tilt or brow framing in more detail, while the full face report adds written interpretation and styling concepts across the face. Those broader options do not change what this opening measurement means.
Eye shape: common questions
Why does my eye shape label change when I smile?
Smiling can change the visible eye opening, which is the feature this tool measures. A ratio near a category boundary may then move into another descriptive band. Use a relaxed expression for a reference eye shape photograph, and compare the actual widths and heights before interpreting a change in the label. The category is not intended as a permanent classification.
Can I have two different eye shapes?
The detected eye openings can have different ratios or corner orientations in one photograph. The result includes measurements from both sides so that the average does not hide every difference. Pose, expression and point placement can all contribute. Compare another clear front image before treating a difference in eye shape readings as a stable feature.
Does almond-like eye shape mean the same as upturned?
No. Almond-like is the name of an opening-ratio band in this tool, while upturned describes the direction of the corner line. An eye shape can combine those traits, but one does not imply the other. Read the opening and canthal-tilt rows separately, and use their overlays to see which feature each description addresses.
Why is eye shape available when tilt is withheld?
A photograph can retain usable opening spans while its orientation is too sensitive to head turn. The tool handles those checks separately. You may therefore see an eye shape description with a request to retake the image before interpreting tilt. That is intentional: a usable eye opening ratio does not automatically make every other measurement equally reliable.
Explore the features around your eye shape
Use canthal tilt for a closer look at corner orientation, or compare the three rays in eyebrow mapping. The full face report connects your eye shape with broader proportions and styling ideas. Treat the free opening result as a specific, visible observation that helps you ask better questions about the whole eye area, without reducing that area to a single label.
Read a complete sample report →